About Us          Certificate          Blog           Contact Us           Free Sample
You are here: Home » Mini Split Installation Kit

Product Category

Mini Split Installation Kit

Mini Split Installation Kit Manufacturer


This Mini split installation kit including a line set, control wire cable, drain hose, wall cover, seal putty etc. Everything you need to install your 12K 18K and 24K mini split system air conditioner. Dabund Pipe is leading Mini Split Installation Kit Manufacturer and Supplier and Factory.


HVAC Parts are produced by Dabund Pipe since 2008 years.


DABUND Mini Split Installation Kit is insulated high quality copper pipe. Seamless pure copper pipe shows no leaks. Pre-flared ends with nuts are for simple and easy installation. Copper coil line set fits most ductless mini split air conditioners and heat pump systems.


White PE Mini Split Installation Kit

With embossed polyethyene film, climate resistant foam, and  thickened insulated cotton, this three-layer insulated mini split copper line set is corrosion-resistant, fireproofing, flame-retarded, thermal insulation, waterproof, shockproof, sound absorption and durable.

Outer Layer: Anti-aging, UV-resistant PE fllm, wear-resistant embossed pattern, antl-aging.

Middle Layer: IXPE foam, dense cell, heat and cold-resistant, impact absorption, no water penetration, good thermal insulation. Water cross-linked PE foam; 30 times foaming.

Inner Layer: Closed-cell structure, air tightness; good thermal insulation, temperature resistant -40℃~120℃.

Copper Tube: 99.9% Pure Copper, specially soft annealed, easy to bend without kink.

Copper Flare: Tube flare is a type of forging operation, and is usually a cold working procedure. During assembly, a flare nut is used.

Package Include: Mini Split Line Set*1, Insulating tape*1,

Wall cover*1,Tie*2,Double sided*1,Nail*4,Sealing mud*1.


Black Rubber Mini Split Installation Kit

Black rubber insulated pipe: Pipe Insulation, Material Polyethylene, Pre-Slit, Temp. Range -40 Degrees to 120 Degrees .

The pipe insulation has a better function of moisture condensation. Insulation material is both the insulation layer and moisture-proof layer.

There is no need to drop the water vapor permeation protective layer so that it has a better moisture condensation function.

Copper Flare: Tube flaring is a type of forging operation, and is usually a cold working procedure.

During assembly, a flare nut is used to secure the flared tubing's tapered end to the also tapered fitting.

Copper Pipe: Air conditioner copper pipe the end of the 1-10m tube can be used as a flare and copper slug, Dabund Pipe's high quality copper coils meet/exceed ASTM B280 air conditioning and refrigeration standards (made from C12200 - 99.9% pure copper).

Copper Nut: The connection between two copper pipes, one to two, quick connection, no welding, can be tightened with a wrench. Air-conditioning copper pipe joints,intermediate joints, high-quality copper cores are sturdy and durable, and are not easily damaged when installed.

Package Include: Mini Split Line Set*1, Insulating tape*1,

Wall cover*1,Tie*2,Double sided*1,Nail*4,Sealing mud*1.


Copper & Aluminum Mini Split Installation Kit

The insulated copper-aluminum pipe is mainly composed of copper and aluminum. The technology of the copper-aluminum pipe welding part is called resistance welding. The copper pipe lock is inserted into the copper pipe of the corresponding size and placed in the mold on the machine for welding. This technology is very mature and will not be easily damaged. Please rest assured to buy DABUND PIPE insulated copper-aluminum  pipe.

Package Include: Mini Split Line Set*1, Insulating tape*1,

Wall cover*1,Tie*2,Double sided*1,Nail*4,Sealing mud*1.


1/4 + 3/8 Mini Split Installation Kit used for 0.75TON - 1.0TON mini split air conditioner.

1/4 + 1/2 All Insulated Copper Pipe used for 1.5TON - 2.0TON mini split air conditioning.

1/4 + 5/8 Insulated Copper Piping used for 2.0TON - 2.5TON split air conditioner system.

3/8 + 5/8 Insulated Copper Tube apply for 3.0TON - 4.0TON ductless mini split air conditioner.

3/8 + 3/4 Insulated Copper Tubing used for 4.5TON - 6.0TON split air conditioner installation.

3/8 + 7/8 Insulated Copper Piping apply for 6.0TON - 8.0TON ductless mini split air conditioner.


Air conditioning copper line sets 1/4 + 3/8 used for 0.75P and 1P split air conditioning.

Copper pipe kit 1/4 + 1/2 commonly used for 1.5P and 2P mini split air conditioners.

1/4 + 5/8 Insulated copper line set used for 2P and 2.5air conditioner system.

3/8 + 5/8 Mini-split copper line set apply for 3P and 4P ductless mini split air conditioner.

3/8 + 3/4 Copper pipe kit used for 4.5P and 6P split aircon installation.

3/8 + 7/8 Insulated Copper Pipe Piping apply for 6P - 8p TON ductless mini split air conditioner.


1/4 + 3/8 Mini split line set used for 9000BTU and 12000 BTU split air conditioner.

All copper line set 1/4 + 1/2 commonly used for 12000 BTU and 18000 BTU mini split air conditioners.

1/4 + 5/8 Insulated copper line set used for 24000 BTU and 30000 BTU air conditioner system.

3/8 + 5/8 Mini-split line set apply for 36000 BTU and 48000 ductless air conditioner.

3/8 + 3/4 line set kit used for 54000 BTU and 72000 split air conditioner installation.

3/8 + 7/8 Insulated Copper Pipe Piping apply for 72000 BTU - 96000 BTU ductless mini split air conditioner.


Aircon copper line set 1/4 + 3/8 used for 9K and 12K split air conditioner.

High quality copper line set 1/4 + 1/2 commonly used for 12K and 18K mini split air conditioners.

1/4 + 5/8 Insulated copper line set used for 24K and 30K air conditioner system.

3/8 + 5/8 Mini-split line set apply for 36K and 48K ductless air conditioner.

3/8 + 3/4 Line set kit used for 54K and 72K split air conditioner installation.

3/8 + 7/8 Insulated Copper Pipe Piping apply for 72K - 96K ductless mini split air conditioner.


Why Choose Mini Split Installation Kit from DABUND PIPE?

We are manufacturer of AC Line Set since 2008 years, have good experience of producing and exporting.We have cooperated 9 years forwarder, can guarantee the shipment. Every week we load at least 6-8 40HQ to different countries. Choose Dabund You will win the business.

Individual Mini Split Installation Kit to perfectly fit every ductless mini-splits, VRF, heat pumps and unitary systems installation.


Quality products with competitive pricing

Peace of mind with professional services


Where is the AC Pipe, there is the Dabund Pipe.

We help you avoid the pitfalls to deliver the quality and value your HVAC&R products needs, on-time and on-budget.
Contact us

Products

ahr-expo
2025 AHR EXPO
Orange County Convention Center, Orlando, Florida
   February 10-12, 2025   
Booth No: 9139

Quick Links

Services

Contact us
© COPYRIGHT 2024 DABUND PIPE ALL RIGHTS RESERVED.