Composition:natural rubber + carbon clack +anti-aging system.
Scope:Home air conditiong
Product Features:Hot galvanize screw, rubber material, durable Design, strong rubber
Product Advantages: Anti-corrosion, shock absorber noise reduction, easy to install
-
DABUND
-
Natural rubber + carbon black + anti-aging system
Application
Air Conditioner Rubber Mounting Damping Pads
DABUND Air Conditioner Rubber Mounting Damping Pads are designed to support compatible mini split outdoor condenser units while helping isolate equipment vibration from the mounting surface.
The rubber damping pads use anti-slip contact surfaces at the top and bottom and a solid, non-hollow bottom structure. They are intended for compatible indoor or outdoor HVAC mounting applications where vibration absorption and vibration-related noise reduction are required.
Quick Answer: These AC anti-vibration rubber pads are installed beneath compatible outdoor condenser mounting legs to provide support, reduce direct vibration transmission and help limit vibration-related operating noise.
Selection Notice: The current product information does not provide dimensions, rubber hardness, bolt size or maximum load rating. Confirm the outdoor-unit weight, mounting-hole dimensions and required support capacity before ordering.
AC Rubber Damping Pad Specifications
| Product Type | Air Conditioner Rubber Mounting Damping Pads |
| Material | Rubber |
| Main Function | Vibration absorption, equipment support and vibration-related noise reduction |
| Anti-Slip Structure | Rubber contact surfaces on top and bottom |
| Bottom Design | Solid / non-hollow bottom according to current product information |
| Installation Method | Bolt-through mounting beneath compatible outdoor-unit legs |
| Installation Environment | Compatible indoor or outdoor applications |
| Typical Application | Compatible mini split air conditioner outdoor condenser units |
Rubber Anti-Vibration Mount for AC Outdoor Units
The damping pads create a rubber interface between the outdoor condenser mounting legs and the supporting surface.
This rubber interface is intended to reduce direct vibration transfer from the operating equipment into the mounting structure.
Rubber Anti-Vibration Mount
Damping Pad Details
Vibration Isolation for Outdoor Condenser Units
Outdoor air-conditioning equipment can transfer vibration through its mounting legs into a floor, support frame or other installation surface.
Rubber damping pads are intended to reduce this direct mechanical transmission by placing an elastic rubber layer between the equipment and mounting surface.
Actual vibration reduction depends on the equipment weight, operating condition, mounting surface, rubber characteristics and overall installation quality.
Noise Reduction Through Vibration Control
The current product information describes the rubber pads as providing both vibration absorption and noise-reduction effects.
Rubber damping can help reduce noise caused by vibration being transmitted into the supporting structure. It does not eliminate equipment-generated fan, compressor or airflow noise.
Installation
Shock and Vibration Absorption
Product Package
Anti-Slip Top and Bottom Surfaces
Rubber contact surfaces are provided at both the top and bottom of the damping pad according to the current product information.
This structure is intended to improve contact between the equipment mounting leg, rubber pad and supporting surface while the unit is properly secured.
Solid Non-Hollow Rubber Base
The current product description specifically identifies the bottom of the rubber mounting pad as non-hollow.
The solid-bottom configuration provides continuous rubber contact with the supporting surface.
Rubber Material for Indoor and Outdoor Use
The damping pads are made from rubber and are described in the current product information as suitable for compatible indoor and outdoor use.
The source also describes the material as waterproof and moisture resistant. Exact rubber formulation, weathering data and operating-temperature limits are not provided and should be confirmed when these properties are critical.
How to Install AC Rubber Damping Pads
Step 1: Check Equipment Compatibility
Confirm the outdoor-unit weight, leg dimensions and mounting-hole positions before installing the rubber damping pads.
Step 2: Position the Damping Pads
Place the rubber pads beneath the outdoor-unit mounting legs and align the fixing holes.
Step 3: Insert the Fixing Screws
Pass suitable screws through the equipment leg holes and mounting-pad arrangement according to the installation configuration.
Step 4: Secure the Nuts
Fasten the compatible nuts to secure the equipment and damping pads in place.
Step 5: Confirm Stability
Check that the outdoor unit is level, stable and securely mounted before operation.
Applications
These rubber mounting damping pads are intended for compatible HVAC equipment installations where vibration isolation and equipment support are required.
Mini split air conditioner outdoor units
Outdoor condenser units
Compatible HVAC equipment
Outdoor unit vibration isolation
Shock-absorbing equipment mounting
Vibration-related noise reduction applications
Rubber Damping Pads vs. Direct Mounting
Directly mounting an outdoor unit onto a rigid surface can allow vibration to transfer into the supporting structure.
Installing rubber damping pads between the equipment and support surface creates an elastic interface intended to reduce this direct vibration path.
Proper mechanical fixing is still required. The damping pads should not be used as a substitute for the mounting and anchoring requirements specified by the HVAC equipment manufacturer.
How to Select AC Anti-Vibration Pads
Confirm the Outdoor Unit Weight
The current product information does not provide a maximum load rating. Confirm that the selected damping pads can support the actual equipment weight.
Check the Pad Dimensions
Exact pad dimensions are not included in the current product information. Confirm length, width and height before purchasing for a specific installation.
Check the Mounting-Hole Arrangement
Confirm that the fixing arrangement matches the outdoor-unit leg holes and the required bolts or screws.
Consider the Installation Surface
The supporting surface should be stable, level and capable of supporting the equipment and mounting system.
Consider the Vibration Requirement
For applications where vibration performance is critical, confirm the rubber hardness, load characteristics and damping performance of the exact product configuration before ordering.
Information to Confirm Before Ordering
HVAC distributors, wholesalers, contractors and equipment buyers should confirm the following information when requesting a quotation:
Required damping-pad dimensions
Outdoor-unit weight
Mounting-hole dimensions
Required fixing hardware
Installation environment
Required quantity
Packaging requirements
OEM or private-label requirements
For HVAC Distributors and Contractors
DABUND supplies Air Conditioner Rubber Mounting Damping Pads and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.
For bulk purchasing, buyers should confirm the required pad size, mounting arrangement, equipment weight, quantity and packaging requirements before placing an order.
OEM and ODM Rubber Damping Pads
DABUND accepts OEM and ODM requirements according to the available rubber damping-pad configuration and commercial order requirements.
Logo, packaging and private-label requirements can be discussed before ordering.
Why Choose DABUND AC Rubber Damping Pads?
HVAC Parts Supply Experience Since 2008
DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.
Vibration Isolation Design
The rubber pads provide an elastic interface between compatible HVAC equipment and the installation surface to help reduce direct vibration transmission.
Anti-Slip Rubber Surfaces
Rubber contact surfaces at the top and bottom are intended to improve contact at the mounting points.
Simple Installation
The current product instructions use a straightforward bolt-through installation beneath compatible air-conditioner mounting legs.
Frequently Asked Questions
What are AC rubber damping pads used for?
They are installed beneath compatible HVAC equipment mounting legs to provide support and help reduce direct vibration transmission.
What material are the damping pads made from?
The current product information identifies the pads as rubber.
Do AC rubber pads reduce vibration?
Yes. The pads are intended to absorb vibration and reduce direct vibration transfer into the mounting surface.
Do the pads reduce noise?
They can help reduce vibration-related noise transmission. They do not eliminate compressor, fan or airflow noise produced by the equipment itself.
Are the rubber pads anti-slip?
The current product description states that rubber contact surfaces are provided at both the top and bottom for anti-slip performance.
Is the bottom of the pad hollow?
No. The current product information specifically describes a non-hollow bottom.
Can the damping pads be used outdoors?
The current product information describes the rubber pads as suitable for compatible indoor and outdoor applications.
Are the rubber pads waterproof?
The source product information describes the material as waterproof and moisture resistant. Exact test data are not provided.
Can these damping pads fit every mini split outdoor unit?
No. Compatibility depends on the outdoor-unit dimensions, mounting-hole arrangement, weight and required support capacity.
What is the maximum load capacity?
A maximum load rating is not provided in the current product information. Confirm the required capacity before selecting the pads for a specific outdoor unit.
What are the dimensions of the damping pads?
Exact dimensions are not provided in the current product information. Confirm length, width and height before ordering.
What rubber hardness is used?
Rubber hardness is not specified in the current product information.
How are AC damping pads installed?
Position the pads beneath the compatible equipment mounting legs, pass suitable screws through the mounting holes and secure the assembly with nuts.
Can DABUND provide OEM or ODM rubber damping pads?
Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.
Can I get samples before placing a bulk order?
Sample supply is available according to the current product information. View sample information.
What payment terms are available?
Available payment methods can include T/T, L/C at sight and credit card. Final terms depend on the commercial agreement.
What delivery terms are available?
Available international trade terms can include EXW, FOB, CFR and CIF.
What is the typical delivery time?
Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, product configuration, customization and production schedule.
