Air Conditioner Anti-Vibration Rubber Feet Mounts

Heavy-Duty EPDM AC Anti-Vibration Rubber Feet Mounts

DABUND Air Conditioner Anti-Vibration Rubber Feet Mounts are made from hard EPDM and designed for compatible mini split outdoor condenser units that require stable support and vibration isolation.

The current product information lists a total support capacity of up to 800 lb for four pieces. Rubber contact surfaces at the top and bottom help provide anti-slip contact, while the solid non-hollow base supports stable equipment mounting.

These EPDM rubber mounts are intended for compatible indoor or outdoor HVAC installations where reducing vibration transmission and vibration-related structure-borne noise is important.

Quick Answer: These hard EPDM AC anti-vibration mounts support compatible outdoor condenser units, with up to 800 lb total support for four pieces and rubber isolation to help reduce vibration transfer.

Selection Notice: The listed 800 lb capacity applies to all four pieces together. The current product information does not provide an individual-foot load rating, dimensions, EPDM Shore hardness or fixing-bolt size. Confirm these details before use with a specific outdoor unit.

EPDM Anti-Vibration Rubber Mount Specifications

Hard EPDM Rubber Construction

Hard EPDM is identified as the material used for these anti-vibration mounting feet.

The current product information also describes the material as durable, waterproof and moisture resistant for compatible indoor and outdoor applications.

Exact EPDM compound, Shore hardness, temperature range and weathering data are not provided and should be confirmed when required for a specific project.

EPDM Rubber Mount

Rubber Mount Details

Up to 800 lb Total Support for 4 Pieces

The current product information lists support of up to 800 lb for all four rubber mounts together.

The 800 lb figure should be treated as a total four-piece rating. An individual-foot capacity is not provided, so a 200 lb rating per foot should not be assumed.

Actual suitability also depends on equipment weight distribution, mounting-leg position, support-surface condition and the complete fixing arrangement.

Vibration Isolation for AC Outdoor Condenser Units

Outdoor condenser compressors and fans can generate mechanical vibration during operation.

Installing EPDM rubber feet between the equipment mounting legs and the support surface creates an elastic isolation layer intended to reduce direct vibration transmission into the building structure or mounting base.

Actual vibration-isolation performance depends on equipment weight, rubber characteristics, mounting arrangement and installation conditions.

Installation

Vibration and Shock Absorption

Product Package

Helps Reduce Structure-Borne Noise

Vibration transmitted from an outdoor unit into a rigid floor, bracket or support structure can contribute to structure-borne operating noise.

EPDM rubber mounting feet help interrupt this vibration path and can reduce vibration-related noise transmission.

The mounts do not eliminate compressor, fan or airflow noise generated directly by the HVAC equipment.

Anti-Slip Top and Bottom Rubber Surfaces

The current product information describes rubber contact surfaces at both the top and bottom of the mounting feet.

These contact surfaces are intended to improve grip between the outdoor-unit mounting legs, rubber supports and installation surface when the unit is properly secured.

Solid Non-Hollow Base Design

The current product information specifically identifies a non-hollow bottom structure.

The solid-bottom configuration provides a continuous EPDM contact area beneath the mounting foot.

Suitable for Compatible Indoor and Outdoor Installations

The EPDM mounting feet are described in the current product information as suitable for compatible indoor and outdoor equipment installations.

For outdoor projects with specific environmental requirements, confirm temperature resistance, UV exposure requirements, EPDM formulation and other material data for the exact ordered product.

How to Install EPDM AC Anti-Vibration Mounts

Step 1: Confirm Equipment Compatibility

Check the outdoor-unit total weight, mounting-leg arrangement and fixing-hole dimensions before installation.

Step 2: Position the Rubber Feet

Place the EPDM rubber feet beneath the compatible outdoor-unit mounting legs.

Step 3: Align the Mounting Holes

Align each mounting foot with the corresponding fixing hole in the equipment leg.

Step 4: Insert Suitable Fixing Screws

Pass suitable screws through the equipment mounting holes and rubber-foot arrangement according to the installation requirements.

Step 5: Secure the Nuts

Tighten the compatible nuts and make sure all mounting points are securely fixed.

Step 6: Check Equipment Stability

Confirm that the outdoor unit is level, stable and properly secured before operation.

Applications

These EPDM rubber feet mounts are intended for compatible HVAC equipment requiring heavy-duty rubber support and vibration isolation beneath the equipment mounting legs.

• Mini split air conditioner outdoor units

• Outdoor condenser units

• Compatible HVAC equipment

• Outdoor unit vibration isolation

• Shock-absorbing equipment mounting

• Structure-borne noise reduction

• Compatible indoor or outdoor mounting applications

Hard EPDM Mounts vs. Generic Rubber Feet

The key material distinction on this product page is the use of hard EPDM rather than an unspecified generic rubber material.

This model also provides a listed four-piece support capacity of up to 800 lb, giving professional buyers an additional selection reference that is not available on many basic rubber-foot products.

Buyers should still compare dimensions, mounting-hole configuration, equipment weight and project requirements before selecting a vibration mount.

How to Select AC Anti-Vibration Rubber Feet

Confirm Total Equipment Weight

The listed capacity is up to 800 lb for four pieces together. Confirm that the complete equipment weight is suitable for the selected mounting arrangement.

Consider Load Distribution

Outdoor-unit weight may not be distributed equally across all four mounting legs. Do not calculate a guaranteed individual-foot rating by simply dividing 800 lb by four.

Confirm Rubber Foot Dimensions

Exact length, width and height are not provided in the current product information. Confirm physical dimensions before purchasing.

Confirm Mounting-Hole Dimensions

Verify that the mounting holes in the EPDM feet and the HVAC equipment legs are suitable for the required fixing hardware.

Confirm EPDM Material Requirements

If a project specifies EPDM hardness, operating temperature or environmental resistance, request the applicable technical data for the exact configuration before ordering.

Information to Confirm Before Ordering

HVAC distributors, wholesalers, contractors and equipment buyers should confirm the following information before placing an order:

• Outdoor-unit total weight

• Required quantity of rubber mounts

• Rubber-foot dimensions

• Mounting-hole dimensions

• Fixing-hardware requirements

• Indoor or outdoor installation environment

• Required quantity

• Packaging requirements

• OEM or private-label requirements

For HVAC Distributors and Contractors

DABUND supplies EPDM Air Conditioner Anti-Vibration Rubber Feet Mounts and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.

For bulk orders, buyers should confirm required load capacity, mount dimensions, equipment mounting arrangement, quantity and packaging requirements before purchase.

OEM and ODM EPDM Rubber Feet Mounts

DABUND accepts OEM and ODM requirements according to the available EPDM rubber-mount configuration and commercial order requirements.

Logo, packaging and private-label requirements can be discussed before ordering.

Why Choose DABUND EPDM Anti-Vibration Mounts?

HVAC Parts Supply Experience Since 2008

DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.

Hard EPDM Material

Hard EPDM is specifically identified as the material used for this anti-vibration mounting-foot configuration.

Up to 800 lb Total Support for Four Pieces

The current product information provides an up-to-800-lb total support reference for all four pieces together.

Vibration Isolation Design

The EPDM mounts provide an elastic interface between compatible HVAC equipment and the supporting surface to help reduce direct vibration transmission.

Frequently Asked Questions

What material are these AC anti-vibration rubber feet made from?

The current product information identifies the material as hard EPDM.

What is the listed support capacity?

The current product information lists support of up to 800 lb for all four pieces together.

Does each rubber foot support 200 lb?

Not necessarily. The source only provides an 800 lb total figure for four pieces and does not provide a separate individual-foot rating.

What are the EPDM rubber feet used for?

They are installed beneath compatible HVAC equipment mounting legs to provide support and help reduce direct vibration transmission.

Do these mounts reduce vibration?

Yes. The EPDM mounts are designed to absorb vibration and reduce direct mechanical vibration transfer into the supporting surface.

Can the mounts help reduce noise?

They can help reduce vibration-related structure-borne noise. They do not eliminate compressor, fan or airflow noise generated directly by the equipment.

Are the EPDM rubber feet anti-slip?

The current product information describes rubber contact surfaces at both the top and bottom for anti-slip performance.

Is the bottom hollow?

No. The current product description identifies a solid, non-hollow bottom design.

Can the EPDM mounts be used outdoors?

The current product information describes the mounts as suitable for compatible indoor and outdoor applications.

Are the rubber mounts waterproof?

The current product information describes the hard EPDM material as waterproof and moisture resistant. Exact test data are not provided.

Can these mounts fit every mini split outdoor unit?

No. Compatibility depends on equipment dimensions, mounting-hole arrangement, total weight, load distribution and required support capacity.

What size are the rubber feet?

Exact length, width and height are not provided in the current product information. Confirm dimensions before ordering.

What is the EPDM hardness?

The current product information describes the material as hard EPDM but does not provide a Shore hardness value.

How are the anti-vibration mounts installed?

Position the rubber mounts beneath the compatible outdoor-unit legs, align the mounting holes, insert suitable screws and secure the assembly with compatible nuts.

Can DABUND provide OEM or ODM EPDM rubber mounts?

Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.

Can I get samples before placing a bulk order?

Sample supply is available according to the current product information. View sample information.

What payment terms are available?

Available payment methods can include T/T, L/C at sight and credit card. Final terms depend on the commercial agreement.

What delivery terms are available?

Available international trade terms can include EXW, FOB, CFR and CIF.

What is the typical delivery time?

Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, product configuration, customization and production schedule.