Composition:natural rubber + carbon clack +anti-aging system.
Scope:Home air conditiong
Product Features:Hot galvanize screw, rubber material, durable Design, strong rubber
Product Advantages: Anti-corrosion, shock absorber noise reduction, easy to install
-
DABUND
-
Natural rubber + carbon black + anti-aging system
Application
MOQ
Packing
Delivery time
Color
AC Condenser Rubber Mount Anti-Vibration Pads
DABUND AC Condenser Rubber Mounts are designed to support compatible outdoor air-conditioning and HVAC condenser units while helping reduce vibration, shock and structure-borne operating noise.
The mounts are manufactured from a natural rubber compound with carbon black and an anti-aging system for durable HVAC support applications. They can be installed between the outdoor unit and a compatible wall bracket, stand or mounting base.
By isolating direct contact between the condenser and supporting structure, the rubber mounts help reduce vibration transfer into walls, floors and brackets while improving equipment stability.
Quick Answer: These rubber condenser mounts provide vibration isolation, shock absorption and noise reduction for compatible mini split, ductless AC and heat-pump outdoor units.
Product Specifications
| Product Type | AC Condenser Rubber Mount / Anti-Vibration Pad |
| Primary Material | Natural Rubber Compound |
| Compound Components | Natural rubber, carbon black and anti-aging system |
| Main Functions | Vibration isolation, shock absorption and noise reduction |
| Applications | Outdoor AC condensers, mini split and ductless HVAC units |
| Mounting Locations | Compatible wall brackets, stands and condenser support bases |
| Environmental Features | Waterproof, moisture-resistant and corrosion-resistant rubber construction |
AC Condenser Rubber Mount Details
Rubber Mount
Rubber Mount Details
Installation
Noise Reduction & Shock Absorption
Package
Natural Rubber Compound for HVAC Applications
The mount uses a natural rubber compound with carbon black and an anti-aging system designed to provide durable support under repeated HVAC operating vibration.
The rubber construction provides flexibility and damping between the equipment and mounting structure while helping resist moisture and outdoor environmental exposure.
Vibration Isolation and Shock Absorption
Outdoor condensers generate vibration from compressor and fan operation. Installing rubber mounts between the unit and supporting structure helps absorb part of this vibration before it is transferred into the bracket, stand, floor or wall.
Reducing direct vibration transfer can also help limit mechanical shock at the equipment mounting points during normal operation.
Noise Reduction for Outdoor AC Units
Structure-borne vibration can transmit operating noise from an outdoor condenser into walls, floors and supporting frames.
The rubber isolation layer helps reduce this direct vibration path, which can contribute to quieter operation around residential and light commercial HVAC installations.
Suitable Mounting Configurations
AC Wall Brackets
Rubber mounts can be positioned between compatible outdoor condenser feet and wall-mounted HVAC support brackets to help isolate vibration.
Outdoor Unit Stands
They can also be used with compatible condenser stands where vibration isolation is required between the outdoor unit and support frame.
Condenser Support Bases
Rubber mounts may be installed at compatible support points between an outdoor condenser and a suitable base or mounting platform.
HVAC Applications
Mini split outdoor condenser units
Ductless air conditioner outdoor units
Heat-pump outdoor units
Residential HVAC installations
Light commercial HVAC installations
Wall-bracket, stand and support-base mounting systems
Benefits of AC Condenser Rubber Mounts
Reduces Vibration Transfer
Rubber isolation helps reduce direct vibration transmission from the outdoor unit into the mounting structure.
Helps Control Structure-Borne Noise
By reducing vibration transfer, the mounts can help reduce operating noise transmitted through walls, floors and metal supports.
Provides Shock Absorption
The elastic rubber structure helps absorb mechanical shock at the outdoor unit mounting points.
Supports Stable Equipment Mounting
Correctly selected mounts provide an isolation layer between compatible condenser feet and the supporting structure while maintaining secure equipment positioning.
How to Select the Correct Rubber Mount
Confirm the Outdoor Unit Weight
Check the outdoor unit weight and confirm that the selected rubber mount configuration provides the required load capacity.
Confirm Mounting-Hole Size and Position
Check the condenser foot dimensions, mounting-hole diameter and bolt arrangement before selecting the mount.
Confirm Mount Dimensions
Match the rubber mount dimensions to the condenser feet, support bracket or stand to ensure stable contact and correct positioning.
Confirm Installation Environment
Consider whether the mount will be used indoors or outdoors and confirm the required environmental resistance for the project.
Installation Guide
Prepare the Mounting Surface
Make sure the support bracket, stand or condenser base is stable, clean and level before installing the rubber mounts.
Position the Mounts at the Support Points
Position each rubber mount directly under the compatible condenser foot or designated support point so that equipment weight is distributed correctly.
Align the Fasteners
Align the condenser mounting holes and rubber mounts with the required bolts or screws before tightening the assembly.
Avoid Excessive Compression
Fasteners should secure the equipment according to the installation requirements without unnecessarily over-compressing the rubber isolation element.
Recheck After Initial Operation
After initial operation, inspect the mounting points and verify that the hardware remains secure and the condenser is stable.
Information to Confirm Before Ordering
| Outdoor Unit Weight | Required to confirm suitable mount load capacity |
| Condenser Foot Size | Length and width of equipment support points |
| Mounting-Hole Diameter | Required for compatible bolt selection |
| Required Mount Size | Confirm dimensions before bulk ordering |
| Mounting Method | Wall bracket, stand or equipment base |
| Required Quantity | Wholesale, distribution or HVAC project quantity |
Why Choose DABUND AC Condenser Rubber Mounts?
Natural rubber compound with carbon black and anti-aging system.
Designed for vibration isolation and shock absorption.
Helps reduce structure-borne HVAC operating noise.
Suitable for compatible indoor and outdoor condenser support applications.
Can be used with compatible brackets, stands and condenser bases.
Suitable for wholesale and HVAC project supply.
Frequently Asked Questions
What is an AC condenser rubber mount used for?
It is installed between compatible outdoor HVAC equipment and its supporting structure to help reduce vibration, shock and structure-borne noise.
What material is the rubber mount made from?
The product is made from a natural rubber compound with carbon black and an anti-aging system.
How does the rubber mount reduce vibration?
The elastic rubber material absorbs part of the vibration generated by the condenser before it is transferred directly into the supporting bracket, stand, floor or wall.
Can rubber condenser mounts reduce HVAC noise?
Yes. Reducing vibration transfer can help limit structure-borne operating noise from compatible outdoor units.
Can these mounts be used outdoors?
The product is described as waterproof, moisture-resistant and suitable for compatible outdoor HVAC applications.
Can the mounts be used with mini split outdoor units?
Yes, when the outdoor unit weight, mounting-hole arrangement and support dimensions are compatible with the selected rubber mounts.
Can the mounts be used with heat pumps?
They can be used with compatible heat-pump outdoor units when the mounting dimensions and required load capacity are suitable.
Can the rubber mounts be installed on an AC wall bracket?
Yes. They can be installed between compatible condenser feet and wall-mounted AC brackets to help isolate vibration.
Can the mounts be used with condenser stands?
Yes, provided the stand, condenser mounting points and rubber mount dimensions are compatible.
What weight can each rubber mount support?
The exact rated load capacity is not specified in the current product information. Confirm the condenser weight and required mount capacity before ordering.
Are the mounts universal for all air conditioners?
No universal compatibility should be assumed. Confirm the condenser foot dimensions, mounting-hole diameter, equipment weight and required mount dimensions before installation.
Do I need special tools for installation?
Installation normally uses standard compatible bolts or screws, but the required hardware depends on the outdoor unit and mounting structure.
Should the mounting bolts be checked after installation?
Yes. It is good practice to inspect the mounting hardware after initial operation and verify that the outdoor unit remains secure and stable.
Is DABUND a manufacturer?
Yes. DABUND supplies HVAC installation products and accessories.
Can I request samples?
Yes. Samples are available for qualified requests. View Sample Information
What payment terms are available?
Available payment methods include T/T, L/C at sight and credit card.
What delivery terms are available?
Available delivery terms include EXW, FOB, CFR and CIF.
Does DABUND support OEM and ODM?
Yes. OEM and ODM services, including logo customization, are available for suitable orders.
What is the typical delivery time?
The listed typical delivery time is approximately 15–20 days, depending on the order and production requirements.
