AC Outdoor Unit Rubber Mount Vibration Isolator

4-Pack AC Outdoor Unit Rubber Mount Vibration Isolators

DABUND AC Outdoor Unit Rubber Mount Vibration Isolators are designed to support compatible mini split outdoor condenser units while helping reduce vibration transmission into the mounting surface.

The product is supplied as a 4-pack and uses rubber mounting pads with anti-slip contact surfaces at the top and bottom. The current product information also identifies a solid, non-hollow bottom structure.

These rubber mounts are intended for compatible indoor or outdoor HVAC installations where vibration isolation, shock absorption and reduction of vibration-related noise are required.

Quick Answer: This 4-pack rubber vibration isolator set is installed beneath compatible AC outdoor-unit mounting legs to provide support and help reduce direct vibration transfer into the floor, base or mounting structure.

Selection Notice: The current product information does not provide dimensions, rubber hardness, individual load rating, total load rating or fixing-bolt size. Confirm the outdoor-unit weight, mounting-hole dimensions and required support capacity before ordering.

AC Rubber Vibration Isolator Specifications

Rubber Mounts for AC Outdoor Units

The rubber mounts create an elastic interface between the outdoor condenser unit and the supporting surface.

This interface is intended to reduce the direct transmission of equipment vibration into floors, mounting bases or other supporting structures.

Rubber Mount

Rubber Mount Details

Vibration Isolation and Shock Absorption

Mini split outdoor units can generate vibration through compressor and fan operation.

Rubber vibration isolators are used between the equipment mounting legs and support surface to help absorb part of this vibration and reduce direct mechanical transmission.

Actual vibration-isolation performance depends on equipment weight, mount characteristics, installation surface and the complete mounting arrangement.

Helps Reduce Structure-Borne Noise

Mechanical vibration transmitted into a rigid floor or mounting structure can contribute to structure-borne operating noise.

The rubber isolators help interrupt this vibration path and can reduce noise associated with vibration transfer.

They do not eliminate compressor, fan or airflow noise generated directly by the HVAC equipment.

Installation

Vibration and Shock Absorption

4-Pack Rubber Mounts

Four Rubber Vibration Isolators in One Pack

The current product is identified as a 4-pack, providing four individual rubber mounts for compatible HVAC installations.

A four-piece pack can simplify purchasing for outdoor units that require four support points, provided the mount dimensions and equipment mounting layout are compatible.

Anti-Slip Rubber Surfaces

The current product information describes rubber contact surfaces at both the top and bottom of each mount.

These surfaces are intended to improve contact between the equipment mounting leg, rubber isolator and supporting surface when the outdoor unit is correctly secured.

Solid Non-Hollow Bottom Design

The current product information identifies a non-hollow bottom design.

The solid bottom provides a continuous rubber contact area beneath the vibration isolator.

Rubber Material for Indoor and Outdoor Use

The current product information describes the rubber mounts as suitable for compatible indoor and outdoor applications.

The source also describes the material as waterproof and moisture resistant. Exact rubber grade, hardness, temperature range and weathering data are not provided and should be confirmed when required.

How to Install AC Rubber Vibration Isolators

Step 1: Check Outdoor Unit Compatibility

Confirm the outdoor-unit weight, number of mounting points, leg dimensions and fixing-hole positions before installation.

Step 2: Position the Four Rubber Mounts

Position the rubber isolators beneath the compatible outdoor-unit mounting legs.

Step 3: Align the Mounting Holes

Align each rubber mount with the fixing hole in the corresponding equipment leg.

Step 4: Insert Suitable Fixing Screws

Pass suitable screws through the outdoor-unit mounting holes and rubber mount arrangement.

Step 5: Secure the Nuts

Fasten the compatible nuts according to the installation requirements.

Step 6: Check Stability

Confirm that the outdoor unit is level, stable and securely mounted before operation.

Applications

The 4-pack rubber vibration isolator set is intended for compatible HVAC equipment that requires rubber isolation between the equipment mounting legs and supporting surface.

• Mini split air conditioner outdoor units

• Outdoor condenser units

• Compatible HVAC equipment

• Outdoor unit vibration isolation

• Shock-absorbing equipment mounting

• Structure-borne noise reduction

• Compatible indoor or outdoor mounting applications

Vibration Isolators vs. Direct Mounting

Direct contact between an operating outdoor unit and a rigid base can allow vibration to transfer into the supporting structure.

Rubber vibration isolators create an elastic layer between the equipment and mounting surface, helping reduce this direct vibration path.

The rubber mounts do not replace proper mechanical anchoring. Installation should follow the mounting requirements of the HVAC equipment manufacturer.

How to Select AC Rubber Vibration Isolators

Confirm the Number of Required Mounts

This product is supplied as a four-piece pack. Confirm that four support points are appropriate for the actual outdoor-unit mounting configuration.

Confirm Equipment Weight

The current product information does not provide a load rating. Confirm that the selected vibration isolators are suitable for the equipment weight and load distribution.

Check Rubber Mount Dimensions

Exact length, width and height are not provided in the current product information. Confirm physical dimensions before purchasing for a specific installation.

Check Mounting-Hole Compatibility

Verify that the fixing arrangement matches the mounting holes in the outdoor-unit legs and the required bolts or screws.

Consider the Required Isolation Performance

For applications with defined vibration-isolation requirements, confirm rubber hardness, load characteristics and damping performance for the exact product configuration before ordering.

Information to Confirm Before Ordering

HVAC distributors, wholesalers, contractors and professional installers should confirm the following information before placing an order:

• Required quantity of 4-pack sets

• Outdoor-unit total weight

• Rubber mount dimensions

• Mounting-hole dimensions

• Fixing-hardware requirements

• Indoor or outdoor application

• Packaging requirements

• OEM or private-label requirements

For HVAC Distributors and Professional Installers

DABUND supplies AC Outdoor Unit Rubber Mount Vibration Isolators and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.

The four-piece pack format can simplify B2B inventory and purchasing where compatible outdoor units require four mounting supports.

OEM and ODM Rubber Vibration Isolators

DABUND accepts OEM and ODM requirements according to the available rubber vibration-isolator configuration and commercial order requirements.

Logo, packaging and private-label requirements can be discussed before ordering.

Why Choose DABUND AC Vibration Isolators?

HVAC Parts Supply Experience Since 2008

DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.

Four-Piece Pack

The current product is supplied as a four-piece set for compatible equipment installations requiring four rubber support points.

Vibration Isolation Design

Rubber construction creates an elastic interface intended to reduce direct vibration transmission between compatible HVAC equipment and the supporting structure.

Anti-Slip Contact Surfaces

Rubber contact surfaces at the top and bottom help improve contact at the equipment mounting points when correctly installed.

Frequently Asked Questions

What is an AC outdoor unit rubber vibration isolator?

It is a rubber mounting support installed between compatible HVAC equipment and its supporting surface to help reduce direct vibration transmission.

How many rubber mounts are included?

The current product is identified as a 4-pack.

Is this product an AC mounting bracket?

The product shown on this page is a set of rubber mounting vibration isolators rather than a metal wall-mount bracket.

What material are the vibration isolators made from?

The current product information identifies the mounts as rubber.

Do these rubber mounts reduce vibration?

Yes. They are designed to absorb vibration and reduce direct vibration transfer between compatible HVAC equipment and the mounting surface.

Can the mounts help reduce noise?

They can help reduce vibration-related structure-borne noise. They do not eliminate compressor, fan or airflow noise generated directly by the equipment.

Are the rubber isolators anti-slip?

The current product information describes rubber contact surfaces at both the top and bottom for anti-slip performance.

Is the bottom hollow?

No. The current product description identifies a solid, non-hollow bottom design.

Can these vibration isolators be used outdoors?

The current product information describes the mounts as suitable for compatible indoor and outdoor applications.

Are the rubber mounts waterproof?

The source product information describes the rubber material as waterproof and moisture resistant. Exact test data are not provided.

Can these mounts fit every mini split outdoor unit?

No. Compatibility depends on the outdoor-unit dimensions, mounting-hole arrangement, equipment weight and required support capacity.

What is the maximum load capacity?

A maximum load rating is not provided in the current product information. Confirm the required capacity before selecting the product for a specific outdoor unit.

What size are the rubber vibration isolators?

Exact length, width and height are not provided in the current product information. Confirm dimensions before ordering.

How are the rubber mounts installed?

Position the rubber mounts beneath the compatible outdoor-unit legs, align the mounting holes, insert suitable screws and secure the assembly with compatible nuts.

Are screws and nuts included?

The current installation description refers to screws and nuts, but the supplied product information does not clearly confirm the exact fixing hardware included. Confirm package contents before ordering.

Can DABUND provide OEM or ODM rubber vibration isolators?

Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.

Can I get samples before placing a bulk order?

Sample supply is available according to the current product information. View sample information.

What payment terms are available?

Available payment methods can include T/T, L/C at sight and credit card. Final payment terms depend on the commercial agreement.

What delivery terms are available?

Available international trade terms can include EXW, FOB, CFR and CIF.

What is the typical delivery time?

Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, product configuration, customization and production schedule.