4 Pack Anti-Vibration AC Mounting Bracket

4-Pack Anti-Vibration Rubber Mounts for AC Outdoor Units

DABUND 4-Pack Anti-Vibration Rubber Mounts are designed to provide four rubber support points for compatible mini split air conditioner outdoor units.

The complete 4-piece set helps support the outdoor condenser while providing a rubber isolation layer between the equipment mounting legs and the supporting surface.

According to the current product information, the mounts feature rubber contact surfaces at both the top and bottom, a solid non-hollow base, vibration absorption and vibration-related noise reduction.

Quick Answer: This 4-pack provides four anti-vibration rubber mounts for compatible AC outdoor units, helping support the condenser, reduce direct vibration transfer and simplify four-point mounting.

Selection Notice: The current product information does not provide dimensions, rubber hardness, total load capacity, individual-foot capacity or fixing-bolt size. Confirm these details against the actual outdoor unit before ordering.

4-Pack AC Rubber Mount Specifications

Four Rubber Mounts in One Complete Set

The main distinction of this product is the four-piece pack configuration.

For compatible outdoor units that use four support points, one set provides four individual rubber mounts for the complete installation.

This format can simplify purchasing, inventory management and installation preparation for HVAC distributors, contractors and professional installers.

Anti-Vibration Rubber Mount

Rubber Mount Details

Four-Point Support for Compatible Outdoor Units

When an outdoor condenser uses four compatible mounting points, the four rubber mounts can be positioned beneath the equipment legs to create separate support points.

The outdoor unit should remain level and securely anchored after installation. Rubber mounts do not replace the structural support or fixing requirements specified by the equipment manufacturer.

Vibration Absorption for AC Outdoor Units

Compressors and fans inside an outdoor condenser can generate mechanical vibration during operation.

Rubber mounts provide an elastic interface between the equipment mounting legs and the supporting surface, helping reduce direct vibration transmission.

Actual vibration reduction depends on equipment weight, mounting layout, rubber characteristics and installation conditions.

Installation

Vibration and Shock Absorption

4-Piece Package

Shock Absorption at the Mounting Points

The current product information describes the mounts as shock-absorbing rubber supports.

The rubber layer can help cushion mechanical movement transmitted through the mounting legs during normal condenser operation.

Helps Reduce Structure-Borne Operating Noise

Vibration transmitted from an outdoor condenser into a rigid mounting structure can contribute to structure-borne noise.

Rubber mounting feet help interrupt this vibration path and can therefore help reduce vibration-related operating noise.

The mounts do not eliminate compressor, fan or airflow noise generated directly by the HVAC equipment.

Anti-Slip Top and Bottom Rubber Surfaces

The current product information describes rubber contact surfaces at both the top and bottom of each mounting foot.

These surfaces are intended to improve contact between the equipment mounting leg, rubber support and installation surface when the unit is correctly secured.

Solid Non-Hollow Bottom Design

The current product information specifically identifies a non-hollow bottom structure.

This design provides a continuous rubber contact area between each mounting foot and the supporting surface.

Rubber Material for Indoor and Outdoor Use

The mounting feet are made from rubber and are described in the current product information as suitable for compatible heavy-duty indoor or outdoor installations.

The source also describes the material as waterproof and moisture resistant. Exact rubber grade, hardness, temperature range and weathering data are not provided.

How to Install a 4-Pack AC Rubber Mount Set

Step 1: Confirm Four-Point Compatibility

Check whether the outdoor unit uses four mounting points that are suitable for the rubber mounts.

Step 2: Check Equipment Weight

Confirm the total outdoor-unit weight and make sure the selected mounts are appropriate for the required support capacity.

Step 3: Position the Four Rubber Mounts

Position one rubber mount beneath each compatible equipment mounting leg.

Step 4: Align the Fixing Holes

Align the mounting holes in the outdoor-unit legs with the corresponding rubber mount positions.

Step 5: Insert Suitable Screws

Pass suitable fixing screws through the outdoor-unit leg holes and rubber mounting arrangement.

Step 6: Secure the Nuts

Tighten compatible nuts and confirm that all four support points are securely fixed.

Step 7: Check Level and Stability

Confirm that the condenser remains level, stable and correctly supported before operation.

Applications

This four-piece rubber mounting set is intended for compatible HVAC equipment that requires rubber support and vibration isolation beneath multiple equipment mounting points.

• Mini split air conditioner outdoor units

• Outdoor condenser units

• Compatible HVAC equipment

• Four-point condenser support

• Outdoor unit vibration reduction

• Shock-absorbing mounting

• Structure-borne noise reduction

Why Choose a 4-Pack Instead of Individual Mounts?

For compatible outdoor units that require four mounting supports, a complete four-piece pack can simplify purchasing and installation preparation.

Distributors and contractors can stock one packaged set rather than sourcing individual mounts separately for each installation.

The number of mounts required should always be confirmed against the actual outdoor-unit mounting layout.

4-Pack Rubber Mounts vs. Direct Outdoor Unit Mounting

Direct contact between an operating condenser and a rigid supporting surface can allow vibration to transfer directly into the structure.

Four rubber mounting feet provide separate elastic support points intended to reduce direct vibration transmission at the equipment legs.

Rubber mounts do not replace proper structural support or mechanical anchoring. Follow the equipment manufacturer's installation requirements.

4-Pack Rubber Mounts vs. AC Mounting Bracket

The product shown on this page is a four-piece set of rubber mounting feet. It is not the metal AC wall-mount bracket itself.

The rubber mounts can be used as part of a compatible outdoor-unit mounting system where rubber support and vibration isolation are required.

How to Select a 4-Pack AC Rubber Mount Set

Confirm the Number of Mounting Points

This product is supplied as a four-piece pack. Confirm that the outdoor unit requires four compatible support points.

Confirm Outdoor Unit Weight

The current product information does not provide a load rating. Confirm that the complete mounting set can support the actual equipment weight and load distribution.

Confirm Rubber Mount Dimensions

Exact length, width and height are not provided in the current product information. Confirm dimensions before ordering.

Check Mounting-Hole Compatibility

Verify that the fixing arrangement matches the outdoor-unit leg holes and required bolts or screws.

Confirm the Installation Surface

The supporting surface should be stable, level and capable of supporting the complete outdoor-unit mounting system.

Information to Confirm Before Ordering

HVAC distributors, wholesalers, contractors and professional installers should confirm the following information before ordering:

• Required quantity of 4-piece sets

• Outdoor-unit total weight

• Number of mounting points

• Rubber mount dimensions

• Mounting-hole dimensions

• Required fixing hardware

• Indoor or outdoor installation

• Packaging requirements

• OEM or private-label requirements

For HVAC Distributors and Contractors

DABUND supplies 4-pack anti-vibration rubber mounts and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.

The packaged four-piece configuration can be suitable for B2B inventory programs where complete mounting sets are preferred.

OEM and ODM 4-Pack Rubber Mounts

DABUND accepts OEM and ODM requirements according to the available rubber-mount configuration and commercial order requirements.

Logo, packaging and private-label requirements can be discussed before ordering.

Why Choose DABUND 4-Pack AC Rubber Mounts?

HVAC Parts Supply Experience Since 2008

DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.

Complete Four-Piece Set

The four-piece pack provides four individual rubber supports for compatible outdoor-unit installations requiring four mounting points.

Vibration and Shock Absorption

Rubber construction creates an elastic support layer intended to help reduce direct mechanical vibration and shock transmission.

Anti-Slip Contact Surfaces

Rubber contact surfaces at the top and bottom are intended to improve contact at the equipment mounting points when correctly installed.

Frequently Asked Questions

How many rubber mounts are included in this product?

The current product is identified as a 4-pack containing four rubber mounting feet.

What are the four rubber mounts used for?

They are installed beneath compatible outdoor-unit mounting legs to provide four support points and help reduce direct vibration transmission.

Is this product an AC mounting bracket?

No. The product shown here is a four-piece set of rubber mounting feet rather than the metal AC wall-mount bracket itself.

What material are the mounts made from?

The current product information identifies the mounting feet as rubber.

Do the rubber mounts reduce vibration?

Yes. They are designed to provide a rubber isolation layer that helps reduce direct vibration transfer from compatible outdoor equipment into the supporting surface.

Can the mounts help reduce noise?

They can help reduce vibration-related structure-borne noise. They do not eliminate compressor, fan or airflow noise generated directly by the equipment.

Do the mounts absorb shock?

The current product information describes the rubber mounting feet as providing shock absorption in addition to vibration reduction.

Are the mounts anti-slip?

The current product information describes rubber contact surfaces at the top and bottom for anti-slip performance.

Is the bottom hollow?

No. The current product information identifies a solid, non-hollow bottom design.

Can the mounts be used outdoors?

The current product information describes the mounts as suitable for compatible indoor and outdoor applications.

Are the rubber mounts waterproof?

The source describes the rubber material as waterproof and moisture resistant. Exact environmental test data are not provided.

Can this 4-pack fit every mini split outdoor unit?

No. Compatibility depends on the outdoor-unit mounting layout, dimensions, weight and required support capacity.

What is the maximum load capacity?

A maximum load rating is not provided in the current product information. Confirm the required support capacity before ordering.

What size are the rubber mounts?

Exact length, width and height are not provided in the current product information. Confirm dimensions before ordering.

How is the 4-pack installed?

Position one rubber mount beneath each compatible outdoor-unit leg, align the mounting holes, insert suitable screws and secure the assembly with compatible nuts.

Are screws and nuts included?

The current installation description refers to screws and nuts, but the source does not clearly confirm the exact fixing hardware included. Confirm package contents before ordering.

Can DABUND provide OEM or ODM 4-pack rubber mounts?

Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.

Can I get samples before placing a bulk order?

Sample supply is available according to the current product information. View sample information.

What payment terms are available?

Available payment methods can include T/T, L/C at sight and credit card. Final payment terms depend on the commercial agreement.

What delivery terms are available?

Available international trade terms can include EXW, FOB, CFR and CIF.

What is the typical delivery time?

Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, product configuration, customization and production schedule.