Rubber Mounts For Air Conditioner

Heavy-Duty Rubber Mounts for Air Conditioner Outdoor Units

DABUND Rubber Mounts for Air Conditioners are heavy-duty support feet made from hard EPDM for compatible mini split outdoor condenser units.

The current product information lists a total support capacity of up to 800 lb for four pieces. The mounts provide a rubber interface between the outdoor unit and its supporting surface while also helping reduce vibration transmission.

Rubber contact surfaces are provided at the top and bottom, together with a solid, non-hollow base design intended to provide stable contact at the equipment mounting points.

Quick Answer: These hard EPDM rubber mounts support compatible AC outdoor condenser units, with a listed total capacity of up to 800 lb for four pieces and additional vibration-absorbing performance.

Selection Notice: The 800 lb value applies to all four pieces together. The current product information does not provide an individual-foot load rating, dimensions, Shore hardness or fixing-bolt size. Confirm these details for the actual outdoor unit before ordering.

AC Condenser Rubber Mount Specifications

Hard EPDM Outdoor Unit Supports

Hard EPDM is identified as the material used for this rubber mounting-foot configuration.

The current product information describes the mounts as durable and suitable for compatible heavy-duty indoor or outdoor applications. It also describes the material as waterproof and moisture resistant.

Exact EPDM compound, Shore hardness, operating-temperature range and environmental test data are not provided and should be confirmed when these specifications are required.

Heavy-Duty Rubber Mount

Rubber Mount Details

Up to 800 lb Total Support for Four Pieces

The current product information lists support of up to 800 lb for all four rubber mounts together.

This total rating provides a useful reference when selecting rubber support feet for compatible outdoor condenser units.

The source does not provide an individual-foot load rating. Equipment weight may also be distributed unevenly across the mounting points, so a 200 lb rating per foot should not be assumed.

Stable Support for AC Outdoor Condenser Units

The rubber mounts are installed between the condenser mounting legs and the support surface, creating a dedicated equipment-support interface.

This configuration can be used for compatible mini split outdoor units where rubber mounting feet are required instead of direct contact between the equipment legs and a rigid base.

Proper anchoring and a stable supporting surface are still required according to the outdoor-unit installation requirements.

Outdoor Unit Installation

Vibration Absorption

Product Package

Vibration and Shock Absorption

Compressors and fans inside air conditioner outdoor units can create vibration during operation.

Placing hard EPDM rubber mounts beneath the condenser legs creates an elastic layer that can help reduce direct mechanical vibration transmission into the supporting surface.

Actual performance depends on equipment weight, load distribution, rubber characteristics and the complete mounting arrangement.

Helps Reduce Vibration-Related Noise

Structure-borne noise can occur when vibration from an outdoor condenser is transmitted into a rigid base or supporting structure.

Rubber mounting feet can help reduce this vibration path and therefore help limit vibration-related operating noise.

They do not eliminate compressor, fan or airflow noise generated directly by the air conditioner.

Anti-Slip Top and Bottom Surfaces

The current product information describes rubber contact surfaces at both the top and bottom of each mounting foot.

These surfaces are intended to improve contact between the outdoor-unit mounting leg, rubber foot and supporting surface when the equipment is properly secured.

Solid Non-Hollow Bottom

The current product information specifically identifies the bottom structure as non-hollow.

This provides a continuous rubber contact area beneath the mount.

How to Install Air Conditioner Rubber Mounts

Step 1: Confirm Outdoor Unit Weight

Check the total condenser weight and confirm that the selected four-piece mounting arrangement is suitable for the equipment.

Step 2: Check the Mounting Layout

Verify the number, position and spacing of the outdoor-unit mounting legs.

Step 3: Position the Rubber Mounts

Place the rubber mounts beneath the compatible condenser mounting legs.

Step 4: Align the Mounting Holes

Align the mounting holes in the equipment legs with the rubber mount fixing positions.

Step 5: Insert Suitable Screws

Pass suitable fixing screws through the outdoor-unit leg holes and rubber mount arrangement.

Step 6: Secure the Nuts

Tighten compatible nuts and confirm that all mounting points are securely fixed.

Step 7: Check Stability and Level

Before operation, confirm that the outdoor unit is stable, level and correctly supported at all mounting points.

Applications

These heavy-duty rubber mounts are intended for compatible HVAC equipment requiring support and vibration absorption beneath the equipment mounting legs.

• Mini split air conditioner outdoor condensers

• Outdoor condensing units

• Compatible HVAC outdoor equipment

• Condenser support applications

• Equipment vibration reduction

• Shock-absorbing mounting

• Structure-borne noise reduction

Rubber Mounts vs. Direct Outdoor Unit Support

Direct contact between an operating outdoor condenser and a rigid surface can allow vibration to transfer directly into the supporting structure.

Rubber mounts provide a resilient support layer between the equipment legs and the mounting surface, helping reduce this direct vibration path.

Rubber mounting feet do not replace proper anchoring or structural support. Installation should follow the equipment manufacturer's mounting requirements.

How to Select Rubber Mounts for an Air Conditioner

Confirm the Total Condenser Weight

The current product information lists up to 800 lb total support for four pieces. Confirm that the actual outdoor-unit weight is suitable for the complete mounting arrangement.

Consider Load Distribution

Outdoor-unit weight may not be distributed equally between all support points. Do not assume a guaranteed 200 lb capacity for each individual mount.

Confirm Rubber Mount Dimensions

Exact length, width and height are not provided in the current product information. Confirm dimensions before purchasing for a specific condenser.

Check Mounting-Hole Compatibility

Confirm that the fixing arrangement matches the outdoor-unit mounting holes and required hardware.

Confirm EPDM Requirements

If the project requires a specific EPDM hardness, temperature range or environmental performance, confirm the applicable technical data for the exact ordered configuration.

Information to Confirm Before Ordering

HVAC distributors, wholesalers, contractors and professional installers should confirm the following information before ordering:

• Outdoor condenser total weight

• Required number of rubber mounts

• Rubber mount dimensions

• Mounting-hole dimensions

• Required fixing hardware

• Indoor or outdoor installation

• Required quantity

• Packaging requirements

• OEM or private-label requirements

For HVAC Distributors and Contractors

DABUND supplies heavy-duty Air Conditioner Rubber Mounts and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.

For bulk purchasing, buyers should confirm equipment weight, mount dimensions, installation arrangement, order quantity and packaging requirements.

OEM and ODM Air Conditioner Rubber Mounts

DABUND accepts OEM and ODM requirements according to the available rubber-mount configuration and commercial order requirements.

Logo, packaging and private-label requirements can be discussed before ordering.

Why Choose DABUND Air Conditioner Rubber Mounts?

HVAC Parts Supply Experience Since 2008

DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.

Hard EPDM Construction

Hard EPDM is specifically identified as the material used for this heavy-duty rubber mounting-foot configuration.

Up to 800 lb Total Support

The current product information lists total support of up to 800 lb for four pieces, providing a defined reference for equipment-support selection.

Condenser Support and Vibration Absorption

The mounts combine equipment support with a rubber isolation layer intended to help reduce direct vibration transmission.

Frequently Asked Questions

What are rubber mounts for an air conditioner?

They are rubber support feet installed beneath compatible air conditioner outdoor-unit mounting legs to support the equipment and help reduce vibration transmission.

What material are these AC rubber mounts made from?

The current product information identifies the material as hard EPDM.

What is the listed load capacity?

The current product information lists total support of up to 800 lb for all four pieces together.

Does each rubber mount support 200 lb?

An individual-foot rating is not provided. The source only states up to 800 lb for four pieces together, so 200 lb per mount should not be assumed.

Do these rubber mounts reduce vibration?

Yes. They are intended to absorb vibration and reduce direct mechanical transmission between compatible outdoor equipment and the supporting surface.

Can they help reduce operating noise?

They can help reduce vibration-related structure-borne noise. They do not eliminate compressor, fan or airflow noise generated directly by the equipment.

Are the mounts anti-slip?

The current product information describes rubber contact surfaces at both the top and bottom for anti-slip performance.

Is the bottom hollow?

No. The current product information identifies a solid, non-hollow bottom design.

Can these rubber mounts be used outdoors?

The current product information describes them as suitable for compatible indoor and outdoor applications.

Are the EPDM mounts waterproof?

The source describes the hard EPDM material as waterproof and moisture resistant. Exact environmental test data are not provided.

Can these mounts fit every air conditioner?

No. Compatibility depends on equipment dimensions, mounting-hole arrangement, total weight, load distribution and required support capacity.

What size are the rubber mounts?

Exact dimensions are not provided in the current product information. Confirm length, width, height and mounting-hole dimensions before ordering.

What is the EPDM hardness?

The product is described as hard EPDM, but a specific Shore hardness value is not provided.

How are the AC rubber mounts installed?

Position the mounts beneath the compatible outdoor-unit legs, align the fixing holes, insert suitable screws and secure the assembly with compatible nuts.

Are screws and nuts included?

The current installation description refers to screws and nuts, but it does not clearly confirm the exact fixing hardware included. Confirm the package contents before ordering.

Can DABUND provide OEM or ODM rubber mounts?

Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.

Can I get samples before placing a bulk order?

Sample supply is available according to the current product information. View sample information.

What payment terms are available?

Available payment methods can include T/T, L/C at sight and credit card. Final payment terms depend on the commercial agreement.

What delivery terms are available?

Available international trade terms can include EXW, FOB, CFR and CIF.

What is the typical delivery time?

Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, configuration, customization and production schedule.