Composition:natural rubber + carbon clack +anti-aging system.
Scope:Home air conditiong
Product Features:Hot galvanize screw, rubber material, durable Design, strong rubber
Product Advantages: Anti-corrosion, shock absorber noise reduction, easy to install
-
DABUND
Application
Heavy-Duty EPDM AC Anti-Vibration Rubber Feet Mounts
DABUND Air Conditioner Anti-Vibration Rubber Feet Mounts are made from hard EPDM and designed to support compatible mini split outdoor condenser units while helping reduce vibration transmission and vibration-related noise.
The current product information lists a total support capacity of up to 800 lb for a four-piece set. The mounts feature rubber contact surfaces at both the top and bottom, together with a solid, non-hollow base design.
They are intended for compatible indoor or outdoor HVAC installations and can be fixed beneath the equipment mounting legs using suitable screws and nuts.
Quick Answer: These heavy-duty EPDM anti-vibration mounts provide rubber support beneath compatible AC outdoor units, with a listed total capacity of up to 800 lb for four pieces and an anti-slip design for vibration isolation.
Selection Notice: The 800 lb figure is listed for all four pieces together. The current product information does not provide individual-foot capacity, dimensions, EPDM hardness or bolt size. Confirm the outdoor-unit weight, load distribution and mounting dimensions before use.
EPDM AC Anti-Vibration Mount Specifications
| Product Type | Air Conditioner Anti-Vibration Rubber Feet Mounts |
| Material | Hard EPDM |
| Listed Capacity | Up to 800 lb total for 4 pieces |
| Main Function | Equipment support, vibration absorption and vibration-related noise reduction |
| Anti-Slip Design | Rubber contact surfaces at top and bottom |
| Bottom Structure | Solid / non-hollow bottom |
| Installation | Bolt-through mounting beneath compatible equipment legs |
| Environment | Compatible indoor or outdoor use |
| Application | Compatible mini split air conditioner outdoor condenser units |
Hard EPDM Rubber Construction
The current product information identifies hard EPDM as the material used for these air conditioner mounting feet.
The source also describes the material as durable, waterproof and moisture resistant for compatible indoor and outdoor installations.
Exact EPDM hardness, compound formulation, temperature range and environmental test data are not provided and should be confirmed when these specifications are required for a project.
EPDM Rubber Pads
Rubber Mount Details
Up to 800 lb Total Support for Four Pieces
The current product information lists a support capacity of up to 800 lb for all four rubber mounts together.
This capacity is stated for the complete four-piece set and should not automatically be divided into a guaranteed individual-foot rating.
Actual suitability depends on equipment weight, load distribution, mounting-foot position, installation surface and the complete fixing arrangement.
Anti-Vibration Support for AC Outdoor Units
Outdoor condenser compressors and fans can generate mechanical vibration during operation.
Installing EPDM rubber mounts between the equipment legs and supporting surface creates an elastic interface intended to reduce direct vibration transmission into the mounting structure.
Actual vibration-isolation performance depends on equipment weight, rubber characteristics, mounting arrangement and installation conditions.
Installation
Vibration and Shock Absorption
Product Package
Helps Reduce Vibration-Related Noise
The rubber mounts are intended to reduce vibration transmitted from the outdoor unit into the floor, base or supporting structure.
Reducing this structure-borne vibration can help reduce vibration-related noise during operation.
The mounts do not eliminate compressor, fan or airflow noise produced directly by the HVAC equipment.
Anti-Slip Top and Bottom Design
The current product information describes rubber contact surfaces at both the top and bottom of the mounts.
This anti-slip structure is intended to improve contact between the outdoor-unit mounting legs, rubber feet and supporting surface when the equipment is correctly secured.
Solid Non-Hollow Base
The current product information specifically describes the bottom structure as non-hollow.
This provides a continuous rubber contact area beneath the mount.
How to Install EPDM AC Rubber Feet Mounts
Step 1: Confirm Equipment Weight and Mounting Layout
Check the outdoor-unit weight, mounting-leg arrangement and fixing-hole dimensions before installation.
Step 2: Position the Rubber Mounts
Position the rubber mounts beneath the compatible air conditioner outdoor-unit legs.
Step 3: Align the Mounting Holes
Align the rubber mounting feet with the equipment-leg holes and required fixing positions.
Step 4: Insert Suitable Fixing Screws
Pass the suitable fixing screws through the mounting arrangement according to the equipment and installation requirements.
Step 5: Secure the Nuts
Fasten the compatible nuts and make sure the equipment is securely mounted.
Step 6: Check Stability and Level
Confirm that the outdoor unit is stable, level and properly secured before operation.
Applications
These EPDM anti-vibration mounts are intended for compatible HVAC equipment requiring rubber support beneath the equipment mounting legs.
Mini split air conditioner outdoor units
Outdoor condenser units
Compatible HVAC equipment
Outdoor unit vibration isolation
Shock-absorbing equipment mounting
Vibration-related noise reduction
Indoor or outdoor equipment mounting applications
EPDM Mounts vs. Standard Rubber Mounts
The key material distinction on this product page is the use of hard EPDM rather than an unspecified generic rubber material.
Buyers comparing different vibration-mount products should confirm material, dimensions, load rating and environmental requirements for the specific application rather than assuming that all rubber feet provide identical performance.
How to Select AC Anti-Vibration Rubber Mounts
Confirm Total Equipment Weight
The current product information lists up to 800 lb total support for four pieces. Confirm that the equipment weight and installation arrangement are suitable for the complete set.
Consider Load Distribution
Equipment weight may not be distributed equally across all mounting feet. Do not assume an individual-foot load rating by simply dividing the total listed capacity by four.
Check Rubber Mount Dimensions
Exact length, width and height are not provided in the current product information. Confirm the dimensions before purchasing for a specific outdoor unit.
Check Mounting-Hole Dimensions
Verify that the rubber mount and fixing hardware match the mounting holes in the HVAC equipment legs.
Confirm EPDM Requirements
If a project specifies EPDM hardness, temperature resistance or environmental performance, confirm the exact material data before ordering.
Information to Confirm Before Ordering
HVAC distributors, wholesalers, contractors and equipment buyers should confirm the following information before placing an order:
Outdoor-unit total weight
Required number of mounting feet
Rubber mount dimensions
Mounting-hole dimensions
Required fixing hardware
Indoor or outdoor application
Required quantity
Packaging requirements
OEM or private-label requirements
For HVAC Distributors and Professional Installers
DABUND supplies EPDM Air Conditioner Anti-Vibration Rubber Feet Mounts and related HVAC installation accessories for distributors, wholesalers, contractors and professional installers.
For bulk purchasing, buyers should confirm the required load capacity, mount dimensions, equipment mounting arrangement, quantity and packaging requirements before ordering.
OEM and ODM EPDM Rubber Mounts
DABUND accepts OEM and ODM requirements according to the available rubber-mount configuration and commercial order requirements.
Logo, packaging and private-label requirements can be discussed before ordering.
Why Choose DABUND EPDM Anti-Vibration Mounts?
HVAC Parts Supply Experience Since 2008
DABUND has supplied HVAC installation products and related components since 2008 for international distributors, wholesalers and professional buyers.
Hard EPDM Material
Hard EPDM is specifically identified as the material for this rubber mounting-foot configuration.
Listed 800 lb Four-Piece Capacity
The current product information lists total support of up to 800 lb for four pieces, providing buyers with a defined load reference for product selection.
Vibration Isolation Design
The EPDM mounts provide an elastic layer between compatible HVAC equipment and the supporting surface to help reduce direct vibration transmission.
Frequently Asked Questions
What material are these AC anti-vibration feet made from?
The current product information identifies the material as hard EPDM.
What is the maximum listed support capacity?
The current product information lists support of up to 800 lb for all four pieces together.
Does each rubber foot support 200 lb?
The current product information only provides an 800 lb total figure for four pieces. It does not provide a separate individual-foot load rating, so 200 lb per foot should not be assumed.
What are the rubber mounts used for?
They are used beneath compatible HVAC equipment mounting legs to provide support and help reduce direct vibration transmission.
Do the EPDM mounts reduce vibration?
Yes. They are designed to absorb vibration and reduce direct mechanical vibration transfer between compatible HVAC equipment and the installation surface.
Can the mounts help reduce noise?
They can help reduce vibration-related structure-borne noise. They do not eliminate compressor, fan or airflow noise generated directly by the equipment.
Are the EPDM rubber feet anti-slip?
The current product information describes rubber contact surfaces at both the top and bottom for anti-slip performance.
Is the bottom of the mount hollow?
No. The current product description identifies a non-hollow bottom structure.
Can these mounts be used outdoors?
The current product information describes the mounting pads as suitable for compatible indoor and outdoor applications.
Are the EPDM mounts waterproof?
The source product information describes the hard EPDM material as waterproof and moisture resistant. Exact test data are not provided.
Can these mounts fit every mini split condenser?
No. Compatibility depends on equipment dimensions, mounting-hole arrangement, total weight, load distribution and required support capacity.
What size are the rubber feet?
Exact length, width and height are not provided in the current product information. Confirm dimensions before purchasing for a specific installation.
What is the EPDM hardness?
The current product information describes the material as hard EPDM but does not provide a Shore hardness value.
How are the anti-vibration mounts installed?
Position the rubber mounts beneath the compatible outdoor-unit legs, align the mounting holes, insert suitable screws and secure the assembly using compatible nuts.
Can DABUND provide OEM or ODM EPDM rubber mounts?
Yes. OEM and ODM requirements can be discussed according to the available product configuration and commercial order requirements.
Can I get samples before placing a bulk order?
Sample supply is available according to the current product information. View sample information.
What payment terms are available?
Available payment methods can include T/T, L/C at sight and credit card. Final payment terms depend on the commercial agreement.
What delivery terms are available?
Available international trade terms can include EXW, FOB, CFR and CIF.
What is the typical delivery time?
Current product information lists a typical delivery period of approximately 15–20 days. Actual lead time depends on quantity, product configuration, customization and production schedule.
